 The indestructible filler
- Epoxy mortar for horizontal applications – three times as strong as concrete and three times more resilient
- Available in pre-measured amounts for optimal proportions and bonding
- Ideal for repairing industrial floors, garage floors, thresholds, etc.
- Tolerates heavy traffic and frost
- Can be applied in any thickness
- Easy to mix
|
|
| Make it perfectly smooth again with FLOOR7. |
| |
- Repairing of damage in industrial floors, roadways, garage floors, bridge flooring, weight bridges, loading quays, drives, concrete joints, holes,…
- Levelling and gradient mortar to make durable, shock resistant slopes to facilitate the passage of rolling objects at doors, gates, passage ways, pavements,…
- Mass to repair stairs and steps.
- Fixing and levelling of door rails, floor profiles,...
- Mass for tile repairs; for filling up holes of missing tiles and as a mass to put and join new tiles.
- Repair mortar for floor levels.
- To make small traffic thresholds or catastrophe borders for water and/or chemical products.
- Repairing of wood – e.g. to re-profile rotten, wooden window frames.
- To fill up large cracks, splits and other floor degradation.
|
| |
| Composition: |
Epoxy resin, polyamine hardener and acid cleaned quarts granulate calcinated at 200°C |
| Colour: |
Concrete colour |
| Percentage of dust: |
100% |
| Density: |
ca 2 +/- 0,1 Kg/dm³ |
| Pressure resistance: |
41 N/mm² |
| Tensile strength: |
20 N/mm² |
|
E-modulus |
1701 N/mm² |
| Hardening: |
No shrinking |
| Adherence: |
To stone, concrete, wood: the bonding system is stronger than the materials bonded together.
To metals: minimum 2N/mm²
To plastics: needs to be tested each time.
Doesn’t adhere to polyethylene or polypropylene film (= dismantle means used for boarding) |
| Temperature resistance: |
Permanently from –30°C to 50°C
Accidentally 90°C
Unloaded form durability: 200°C
Resists perfectly to dry-clean |
| Chemical resistance: |
Resists to acids, alkali, salts, oils, petrols, heating oil, manure, urine, most solvents, aggressive vapours, sea air,…
Limited resistance to strong solvents such as methylenechloride, |
|
| |
|
1. Preparation
- Do not use FLOOR7 below a temperature of 8°C.
- The surface should be clean, dry, dust-proof and greaseproof. Loose parts should be removed.
2. Mixing and application
- Add the complete content of the hardener FLOOR7 B to the total quantity of pre-dosed mortar FLOOR7 A in the packing bucket. Mix the two components thoroughly with a low speed drilling machine and a mixer for ca. 2 minutes until a homogeneous mass is obtained.
- NEVER add water, concrete or other products!
- The prepared mortar can be dispersed and levelled on the surface with a trowel.
- Duration of use after mixture: ca. 30 minutes at 15°C
- Hardening times at 15°C (*) :
After ca. 12 hours practicable
After ca. 24 hours mechanical chargeable load-bearing (traffic)
After 7 days chemical resistant
(*) Lower temperatures implicate longer hardening times.
Higher temperatures reduce the hardening times.
- Consumption: ca. 2kg/m²/mm
- Material (trowel, mixer, …) can be cleaned with acetone.
|
| |
- Article number.:
602510 1kg
602550 5kg
- FLOOR7 is delivered in a pre-dosed packing with the correct mixture.
- Shelf life: In a closed packing, frost-free: 1 year.
|
|
| Novatech at your service ! |
|
|
|
 FLOOR7 will let you construct a low speed hump quickly and easily. Rotting windowsills? Make them as good as new with FLOOR7. FLOOR7 can also be used to create permanent thresholds for doors, garage doors, loading docks, etc. Make it perfectly smooth again with FLOOR7!
|
|
