NL   FR   EN   DE 
 
 
   Novatech      News      Products      Distributors      Testimonials      Tips & Tricks      FAQ      Contact  
 

[Click and read the comic!]  
 
Site search
Keyword
 
 
Mailinglist.
Do you want to be informed of the news regarding Novatech products ?
Register to our mailing list
Name
Company/Profession
E-mail *

Product sheet

Nothing is too much for this workhorse

  • All-in-one: replaces assembly and wood glue, polyurethane adhesive, silicone sealant, sanitary silicone sealant, acrylate adhesive and butyl caulking.
  • Can be used to glue, mount and seal everything.
  • Bonds to nearly all materials, even to a damp substrate.
  • Can be used anywhere: inside and out, in the kitchen and bathroom.
  • Super strong, resilient and ready to be painted.


With TEC7 the solution is always simple

Applications
 
  • For all applications, as well in building, bathroom as in general maintenance TEC7 replaces: mounting, wood and P.U. adhesive, silicone sealants, sanitary silicone sealants, acrylic sealants, butyl rubber sealants.
  • As universal adhesive TEC7 bonds to most surfaces and does not attack synthetic material.
  • On mirrors (vertical strips), on natural stone (does not bleed through), polyester, polystyrene foam, wet surfaces, even under water.
  • Repaintable with all common paints.

Technical information
 
Flow 5 bar / 3 mm / 23°C 140 g/min
Skin cure 23°C 50% R.V. 8 minutes
Non-adhering 23°C 50% R.V. 25 minutes
Full cure time 23°C 50% R.V. 
 24u – 6 mm
 48u – 7 mm
 72u – 8 mm
E-Modulus 100% 172N/cm2 / 1,72Mpa
Volume shrinkage after cure < 3 %
Hardness – DIN 53505 60 Shore A
Tensile strength 265 N/cm2 / 2,65 Mpa
Tear strength – DIN 53507

 140 N/cm2 / 1,40 Mpa

Thermal stability - 30°C till + 95°C / Peak: 155°C max. 30 min.
Elongation at rupture – DIN 53504 > 350 %
Non toxic 
Chemical resistancegood: water, seawater, aliphatic solvents, oils,
greases, diluted organic acids, lyes
moderate: esters, ketones, aromatics.
bad: concentrated acids, chlorinated solvents,
chlorine of swimming pools
Shelf life12 months

 


Operating instructions
 
  • Cut the tube at the nose.
  • Cut off the nozzle at the desired dimension.
  • Use a TECgun.
  • Apply on a clean, degreased surface.
  • Finish off the joints with TEC7- CLEANER.

Mode of delivery
 
  • Environmentally friendly 310 ml-tubes.
  • Colours: white, black, grey, beige, brown, terracotta, oak, and green.

Novatech at your service !
  Are you looking for this product in your area?

[click here]

Tips'n Tricks[more]
 Most regular paints can be applied directly to TEC7 – for a perfect finish of those caulked/sealed joints. Even an underwater tear in the lining of your pond can be fixed with TEC7. Or use it to get rid in an instant of that annoying leak under the sink. Did you know that TEC7 can replace mounting glue, wood glue, polyurethane adhesive, silicone sealant, sanitary silicone sealant, acrylate adhesive and even butyl caulking? It’s no wonder so many professionals keep TEC7 in their toolbox. TEC7 dries quickly and without shrinking or losing its resiliency. The vibrations of even the heaviest passing trucks will not affect it.

FAQ[more]
 
"Can Tec7 be used to repair a fishpond or a preformed stream?"
 


printable version
mail this page to
 
 
download PDF-file with product sheet
download msds
Novatech News Products Distributors Testimonials Tips & Tricks FAQ Contact
Tec7 | Trans7 | Trans7 inox | Roof7 | Mix7 | HP 7 | Foam7 | Floor7 | Epofix7 | pur7 | Tec7 cleaner | Rock7 | Roof7 tape | Mix7 2k | Magic Clean 7 | Fast 7 | Wall7 | Super7 plus | pur7plus | gt7 | flex7 | X-Tack7 | Twist7
@2003-2004 Novatech NV | Terms of use | Protection of privacy